How to See Who’s Using Your WiFi

Who else uses your router’s wireless network? You can see what devices are connected to your Wi-Fi network on your computer or router to find out.

Keep in mind that many gadgets can now connect to your Wi-Fi. A large array of electronic gadgets, such as Wi-Fi printers, game consoles, set-top boxes, tablets, cellphones, and more, are included in the list.

Can My Wireless Router Support Multiple Device Connections?

Does the sheer volume of people using your wireless network give you the willies? However, using your home Wi-Fi shouldn’t cause you any undue stress. A router usually allows for around 250 users or devices to connect at the same time.

Because each connected device uses some of the available bandwidth, your network’s performance can suffer significantly when many devices connect simultaneously.

What Is the Best Way to View the Total Number of Wi-Fi Users?

View the Total Number of Wi-Fi Users

There may be too many users or unknown users on the Wi-Fi network; you may see this by counting all the users connected to the network.

You can view the current Wi-Fi user count using the router’s administrative panel or by utilizing a third-party app or program on your mobile device. Then, let’s find out how to do it correctly.

Check Control Panel of the Router:

The home screens of many routers show the current number of users on the network. You need to be able to access the router’s control panel.

Use the Ethernet port or wireless network on the router to connect your device.

The IP address of the router must be located. You may locate the admin login details for your router by consulting this article or looking at the label. Be on the lookout for the label, as it contains the admin login information.

Launch a web browser on your device and input the IP address of the router. To access the router’s login screen, press Enter (or tap Go on mobile devices).

Type in the admin login credentials. They need to be typed in precisely as they appear.

The total number of devices connected can be found either on the main screen or in the settings of the router.

You can find this number on the home screens of Tenda routers, Asus, Belkin, Netgear, and TP-Link devices under Clients, Connected Devices, or Attached Devices. To see all linked devices, choose Clients > Connected or Attached Devices.

The names of devices and their MAC addresses are frequently displayed. Verifying a device’s MAC address or changing its name can help you locate it faster.

Use an App/software to Scan Your Network:

Another alternative is to use applications or software that may be downloaded to your computer or mobile device in order to view the current user count on your Wi-Fi.

Some of the greatest are included in this list:

In addition to acting as a firewall, GlassWire provides visually appealing graphs that show your bandwidth usage, the programs that are connected to it, and the precise bandwidth consumed by each. An alert can be sent to you whenever a program tries to install a new driver for your system or makes a modification. The number of features is simply too large to list them all here.

But what really makes GlassWire relevant to today’s topic is that, under the Settings panel, you can activate notifications whenever a new device tries to connect to your Wi-Fi.

One small app that can scan your network and show you all the devices linked to it is Wireless Network Watcher. If you look all the way to the bottom of the page, you can find the Windows version. A complete inventory of all the devices linked to your network will be shown after the software is installed and run.

Try Windows’ Command Prompt:

You may also find out how many people are using your network by using Command Prompt.

Launch Windows’ Command Prompt. To open Command Prompt, click Start in the Start menu. To open Command Prompt, press Enter.

Please type “ipconfig” into the prompt. The IP address of your router can be found by running this command. Important here is the Default Gateway.

Arp -a is proper now. Hit the Enter key after typing.

Here you may find a complete inventory of all linked devices, along with their IP and MAC addresses. With the router at 192.168.0.1, all other devices on the network will also have IP addresses that begin with 192.168.

How can I remove an unwanted network device?

remove an unwanted network device

You can see which devices are connected to your Wi-Fi by looking at the overall number of users. What do you do if you come across a device that you are unable to recognize? Someone or something at home is hogging the bandwidth on your network.

You can remove specific devices or users by following these guidelines.

Go into the router’s settings and find the option to disconnect the device from the network. As you log in, you should see either Access Control or Bandwidth Control. Make sure Access Control Mode is enabled before you set it to Block. When you’re ready to add more devices to your network ban, click Add device. After you’ve entered their MAC address and selected them from the list, be sure to save your modifications.

In this case, changing your wireless password is your best bet. Do not update the password until you have connected all devices to the wireless network.

To change the Wi-Fi settings, you need to log in to the router’s admin interface. Try searching for Wireless, Wireless Security, Wi-Fi, or something similar depending on the model and manufacturer of your router. This menu should display the Wireless Password box.

A guest Wi-Fi network, MAC filtering, or the router’s Parental Controls are some other options. However, if you want to keep unauthorized people and devices off your network, the two I mentioned are better options.

Conclusion

If you see that your internet speed is decreasing a lot, it is a good idea to look into the possibility of bandwidth abuse. If you notice someone who seems suspicious, it will not come as a surprise. In the end, only people you know and trust should be able to access your network. Please do not allow strangers access to your network, as they may be able to view your private data and files, consume your bandwidth, or otherwise render your network unusable. You ought to take safeguards now so that you do not have to reconfigure your network later because of it.

Also, Read,

FAQs

Who is using my WiFi?

Log into your Wi-Fi router to find a network map or a list of devices that are connected to it. When you log in, this tab is usually the first one that you see. On the network map, search for devices that are not yours. You should know that there are several of these networked devices that could be found in your own house.

Can I find out which devices are connected to my network?

Input the IP address into your browser’s address bar once you have it. A window to your router’s settings should open. To access your router, you must use the default credentials unless you have previously changed them.

After you’ve logged in, you should see a list that says “DHCP Client” or “Connected Devices.” At that point, a list of all the devices linked to your network will be shown to you.

How can I get to the router’s logs?

It is necessary to enter into the web interface of your router in order to view its logs. Depending on your router’s model, you can find the System logs area under the Advanced or Admin settings. You can view the logs after going to the System logs section, provided that they are already enabled.

bloggrand Team

BlogGrand Staff

BlogGrand Team – a cohort of seasoned professionals in the dynamic realm of digital marketing. With a collective wealth of experience spanning diverse industries, our team stands as trailblazers in leveraging the digital landscape to amplify brand presence, drive engagement, and yield impactful results.